TURBOSII DOT 7″ 36w Flood Beam LED Work Light Off Road LED Light Bar 12v Driving Lights Super Bright for Jeep Cabin Boat SUV Truck Car ATVs,1 Years Warranty


TURBO MARKETING TURBO MARKETING - It use the latest led technology, Supplying superior light output and will not drain your battery. Package includes: 2x36W LED Light Installation 1. Red line is positive, black line is negative. 2. 5. Make the bolts go through the mounting holes And set into the spring meson, And then tighten the hex nut. Saving more energy, efficientand so on.

Test the light to make sure it can work properly. Connect the power line to the corresponding power connector. With durable die-cast aluminum housing, the light bar can withstand harsh condition. Effective heat dissipation: High-quality heat conduction silicone gel together with redesigned aluminum alloy housing, providing superior cooling effect for long working lifespan.

TURBOSII DOT 7" 36w Flood Beam LED Work Light Off Road LED Light Bar 12v Driving Lights Super Bright for Jeep Cabin Boat SUV Truck Car ATVs,1 Years Warranty - Specification: 1 led watts: 36w 2 beam: spot 30 degree 3 color temperature: 6000k 4 operating voltage: 10-30v dc 5 bracket Material: Alu firm bracket 6 Lumen: 3000lm 7 Material:Diecast aluminum housing 8 Lens material: PC 9 Waterproof rate: IP 67 10 Dimension: 6. 5 inch 11 certificates: ce & rohs 12 12pcs * 3w high intensity leds application: it is used on any vehicles, mining, bicycle, UTE, off-road, Jeep, trailer, boat, ATV, motor, SUV, truck, car, Excavators, tractor and other heavy equipments.

Solid side mounting bracket: the side mounting bracket can firmly fix the light bar on its position. Make sure the light is installed steadily, And then start the power. High brightness: the flood beam given out by high quality LED chips is bright and concentrated to light up the forward dark road.

More information about TURBO MARKETING TURBO MARKETING

DT MOTO™ Off Road ATV/Jeep LED Light Bar Wiring Harness - 40 Amp Relay ON/OFF Switch


DT MOTO CB-WS12 - 2 sets of power connectors to light fixtures. Consisting of a 40 amp relay, and more than 8 feet of wiring, an illuminated on/off switch, this wiring harness for LED off road lights simplifies the installation process of powering various equipment on all automobiles. Interchangeable/compatible with:All automobiles and devices equipped with a 10 to 30 Volt DC power source.

Features:illuminated on/off switch40a power relay30a blade FuseMore than 8ft of wiring2 sets of power connectors to light fixturesProduct Content:1 x Wiring HarnessOwner's Manual1 Year Warranty Illuminated on/off switch. 40a power Relay. The wiring harness for led off road lights is the perfect accessory for off road vehicles, working vehicles, and any automobile that could use a relay to power specific equipment.

DT MOTO™ Off Road ATV/Jeep LED Light Bar Wiring Harness - 40 Amp Relay ON/OFF Switch - More than 8ft of wiring. 30a blade Fuse.

More information about DT MOTO CB-WS12


Similar products



For Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder - LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" 2 Clamps Includes Allen Hex Key User-friendly


LAMPHUS - 30a blade Fuse. Simplify led light bar installations on your roof rack, bull bar, or headache rackThe LAMPHUS Cruizer Horizontal Bar Clamp Mounting Kit makes installing Cruizer off-road light bars or other light bars with 10mm mounting screws onto your roof rack, bull bar, or headache rack a breeze.2 sets of power connectors to light fixtures.

Deck out your ride with multiple LED lighting accessories without ever having to drill into your vehicle's bodywork. Install multiple light bars on a versatile range of applications, and UTVs, including off-road vehicles like Jeeps, ATVs, or construction & highway maintenance vehicles. Precision-crafted quality painstakingly crafted from premium-grade cast aluminum, these clamps are designed to provide a strong, stable and secure mount for your off-road light bars.

For Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder - LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" 2 Clamps Includes Allen Hex Key User-friendly - 40a power Relay. More than 8ft of wiring. Add more lights, bull bar, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, roll cage, or headache rack.

Almost endless applications- can be used on tubes measuring 1", trucks, utvs, boats, 1.75" & 2" in diameter; perfect for off-road vehicles, Jeeps, ATVs, 1.5", farm vehicles & more.

More information about LAMPHUS


Similar products



EPAuto LED Light Bar Wiring Harness Kit, 12V 40A Relay / Fuse / ON-OFF Switch


EPAuto AE-005-1 - Mark and drill one 3/4" hole. Package content power relay 40a blade fuse 30a 2 sets of power connectors to light fixtures Illuminated Rocker Switch On/Off Rocker LED User Manual Wiring Instructions: Choose your desired mounting location for the switch. Connect the black wires to the ground connection line of the auxiliary lights.

Please make sure to use an in-line fuse rated at a minimum of 3A 12V DC when connecting this power feed wire directly to the battery. Make sure the red wire from the relay can be connected to the positive terminal of the battery while the BLACK wire can be grounded to the chassis. 2 sets of power connectors to light fixtures.

EPAuto LED Light Bar Wiring Harness Kit, 12V 40A Relay / Fuse / ON-OFF Switch - More than 8ft of wiring. Attach the black wire to the pin of the switch GOLD colored, route it then connect it to the ground chassis. Use a sheet metal screw to mount the relay around the battery. Link the red wire to the outer pin COPPER colored of the switch then route and connect it to a steady power source.

40a power Relay. 30a blade Fuse. Finally, push the switch into the 3/4" hole that you drilled out Step 1 Illuminated on/off switch. As your other option, you can also install this wire into an existing power wire in the cabin or into the cabin fuse box and this will exclude the need of an inline fuse.

More information about EPAuto AE-005-1


Similar products



LEANINGTECH One Pair Marine Boat Yacht Light 12V Stainless Steel LED Bow Navigation Lights Pontoons Sailing Signal Lights Red & Green


LeaningTech 0001 - Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, roll cage, or headache rack. Almost endless applications- can be used on tubes measuring 1", trucks, boats, utvs, 1.

75" & 2" in diameter; perfect for off-road vehicles, Jeeps, ATVs, 1.5", farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.

LEANINGTECH One Pair Marine Boat Yacht Light 12V Stainless Steel LED Bow Navigation Lights Pontoons Sailing Signal Lights Red & Green - Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped. 40a power relay & 30A Blade Fuse. Quick and easy mounting installation. Input voltage: dc 12v. 2 sets of power connectors to light fixtures.

. Red for port side and green for starboard side.

More information about LeaningTech 0001


Similar products



MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch


MICTUNING MIC-B1002 - Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch; 4. Dimensions: base dia 2. 4 inch, height 1. 6 inch. Add more lights, bull bar, roll cage, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, or headache rack.

Almost endless applications- can be used on tubes measuring 1", utvs, boats, trucks, 1.75" & 2" in diameter; perfect for off-road vehicles, ATVs, Jeeps, 1.5", farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch - Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped. 40a power relay & 30A Blade Fuse. Mictuning wiring harness for off road led lights is a perfect accessory for off road vehicles, working vehicles and any automobile that could use a relay to power specific equipment.

Great construction Quality wiring material - UL approved. Illuminated on/off switch.

More information about MICTUNING MIC-B1002


Similar products



Waterproof Switch & Mounting Bracket 30A Fuse 40A Relay USA Warranty - LAMPHUS 13' Off Road ATV/Jeep LED Light Bar Wiring Harness Kit


LAMPHUS ORWH01 - Add more lights, roll cage, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, or headache rack. Almost endless applications- can be used on tubes measuring 1", boats, utvs, trucks, 1.

75" & 2" in diameter; perfect for off-road vehicles, ATVs, Jeeps, 1.5", farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last. Comes fully-loaded- includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.

Waterproof Switch & Mounting Bracket 30A Fuse 40A Relay USA Warranty - LAMPHUS 13' Off Road ATV/Jeep LED Light Bar Wiring Harness Kit - Rubber inserts dampen & protect- rubber inserts for snugger fitment with a wider range of sizes; help dampen vibrations during off-roading and protect your bull bar from being scraped. 40a power relay & 30A Blade Fuse. 40a power Relay. Command complete control over your led accessory lightsfully-loaded with a potent 40 amp relay, and 25 Amp water/dustproof On/Off switch with illumination, 30 Amp blade fuse, the LAMPHUS LED Light Bar Wiring Harness Kit places convenient control over all LED light bars & work lights at your fingertips.

. Dimensions: base dia 2. 4 inch, height 1.

More information about LAMPHUS ORWH01


Similar products



MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, Blue


MICTUNING MIC-LSB1 - 2 sets of power connectors to light fixtures. Package included : 1x 5 pin rocker Switch 1x Jumper wire set 1x Diagram Illuminated on/off switch. 30a blade Fuse. Compatible with power source 12 Volt DC. Marine stainless steel cover- resist corrosion. Caution:we recommend professional installation, pls let professional installer to install the switch by following the wiring diagram included; If let the wire short circuit, it would caught a wire, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit and test it after all wire hooked well.

More than 8ft of wiring. 2 sets of power connectors to light fixtures. Built-in led light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles! It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends.

MICTUNING MIC-LSB1 Laser LED Light Bar Rocker Switch ON-OFF LED Light 20A 12V, 5pin, Blue - Surface size is 2" 50mm x 1"25mm. Polycarbonate Lens. Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, roll cage, or headache rack.

Almost endless applications- can be used on tubes measuring 1", boats, trucks, utvs, 1.75" & 2" in diameter; perfect for off-road vehicles, ATVs, Jeeps, 1.

More information about MICTUNING MIC-LSB1


Similar products



12V 30A Waterproof LED Light On/OFF Car Boat Marine Auto Motorcycle 3P Rocker SPST Toggle Switch,Pack of 4


Prizemall - 2 sets of power connectors to light fixtures. Red for port side and green for starboard side. Great boat accessories gifts. Package included : 1x 5 pin Rocker Switch, 1x jumper wires set, 1x Diagram. Quick and easy mounting installation. Input voltage: dc 12v. Rating:12V/DC. 30a blade Fuse. Statement: items are sold by prizemall and provide after-sales service, Prizemall is the only original manufacturer, all other sellers are not original, Prizemall does not provide any quality guarantee and after-sale service !!!.

Wide application: standard 5 pin switch, fog lamps, available for upgrading most wiring harness to control Led Light Bar, Led Work Lights, rated at 20amp/12v and 10amp/24v, Headlights, taillights and Auxiliary Lamps, etc. What you'll get: 1 year quality guarantee for genuine mictuning 5 pin rocker switch and Lifetime Friendly Customer Service.

12V 30A Waterproof LED Light On/OFF Car Boat Marine Auto Motorcycle 3P Rocker SPST Toggle Switch,Pack of 4 - Fluorescent lamp 's will be lighted up when the switch is turned on. Compatible with power source 12 Volt DC. Marine stainless steel cover- resist corrosion. 2 sets of power connectors to light fixtures. 31mm x 19mm hole, 12mm diameter cut size for the tighten screw is required and the switch will sit in nicely; don't need to cut outs.

40a power Relay.

More information about Prizemall


Similar products



MICTUNING MIC-LSR12 5Pin Laser Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue


MICTUNING MIC-LSR12 - Built-in led light emits perfect beam to light up the pattern when the switch is powered up, which also allows you to clearly catch sight of it in a dark environment, no more fumbles! It comes with little jumper connectors and single connectors all nicely made with ends on them and a rubber protector on the female ends.

Standard size mounting hole 1. 41"36mm x. 86"22mm. Led light source- don't use much current and don't run hot like the old traditional bulbs. 1 pair of navigation lights green and red. Warranty 1 year quality guarantee for genuine mictuning 5 Pin Rocker Switch and Lifetime Friendly Customer Service. Radiation angle: 112.

MICTUNING MIC-LSR12 5Pin Laser Rear Lights Rocker Switch On-Off LED Light 20A 12V, Blue - 5 degree. 40a power Relay. Add more lights, bull bar, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, roll cage, or headache rack.

Almost endless applications- can be used on tubes measuring 1", trucks, boats, utvs, 1.75" & 2" in diameter; perfect for off-road vehicles, Jeeps, ATVs, 1.5", farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last.

More information about MICTUNING MIC-LSR12


Similar products



MICTUNING LED Light Bar Wiring Harness Fuse 40Amp Relay ON-OFF spot light Rocker Switch Blue2 Lead


MicTuning 101039 - 2 pole design on/off, 3rd poles with LED to be connected to earth. Mictuning 03 series wiring harness kit with 5 pin on/off rocker switch and easy to install. Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.

Great construction:40a power relay & inline blade fuse for multiple safety protection. With 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.

MICTUNING LED Light Bar Wiring Harness Fuse 40Amp Relay ON-OFF spot light Rocker Switch Blue2 Lead - Cautions:we recommend professional installation, the harness would melt and even caught a fire, We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, pls let professinal installer to wire the harness kit; If let the wire short circuit, or it would got melt as well.

31mm x 19mm hole, 12mm diameter cut size for the tighten screw is required and the switch will sit in nicely; don't need to cut outs. Package included : 1x 5 pin Rocker Switch, 1x jumper wires set, 1x Diagram. Wide application: standard 5 pin switch, available for upgrading most wiring harness to control Led Light Bar, fog lamps, rated at 20amp/12v and 10amp/24v, Led Work Lights, taillights and Auxiliary Lamps, Headlights, etc.

What you'll get: 1 year quality guarantee for genuine mictuning 5 pin rocker switch and Lifetime Friendly Customer Service. Polycarbonate Lens.

More information about MicTuning 101039


Similar products

Women’s Simple Classic High Neck Body Con Midi Dress

Limited Too Girls’ Fashion Top and Pant Set More Styles Available