Tooluxe 50635 Electric Centrifugal Clear Water Pump, 0.5 HP | Pools, Ponds, Irrigation, Garden, Sprinkling | 380 GPH

#ad
#ad
Ridgerock Tools Inc. 50635 #ad - High quality 1/2 hp electric centrifugal clear water pump, 1/2 hp, max capacity:36l/min, max suct lift:8m, Output power: 220W, 60 Hz, 3A Motor Non-submersible 110v 2-pole induction, Input power: 370W, 110 volt, single phase .5 hp motor runs at 3400 rpm, with a maximum flow rate of 380 GPH for a smooth flow for transferring water.

Hmax 8m; uses 1-1/2" pipe, 4. 3 ft. Power cable. Heavy-duty centrifugal pump: Non-submersible electric water pump designed to transfer water from tanks, rain barrels, pools, and ground water. Sturdy cast iron construction: Built for outdoor use, compact and easy to place body is made of cast iron that stays put even under windy conditions.

Provides a steady flow: Stainless steel mechanical seal and heavy-duty impeller. Ideal for ponds, rain barrels, gardening, use in agriculture settings, large aquariums, pools, sprinkling systems, flow irrigation systems, shallow and deep water wells. Other specs: qmax 24l/min, hmax 18m, suct. Dependable service: inline surface clear water pump provides a reliable method for transferring water in both residential and commercial applications.

Tooluxe 50635 Electric Centrifugal Clear Water Pump, 0.5 HP | Pools, Ponds, Irrigation, Garden, Sprinkling | 380 GPH #ad - Input/output: includes a one-inch inlet port and-one inch outlet port, 370W input power and 220W output power. Cast iron pump body, stainless steel mechanical seal, brass impeller w/ radial peripheral blades, #4 steel iron shaft make for a heavy duty pump that stays put even in windy outdoor conditions.

More information about Ridgerock Tools Inc. 50635 #ad

Banjo HB100 Polypropylene Hose Fitting, Adapter, 1" NPT Male x 1" Barbed

#ad
#ad
Banjo Corporation HB100 #ad - They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Maximum working pressure of 150 psi at 70 degrees F. Hose fittings have various types of connections, push-to-connect, dry disconnect, barbed, including threaded, and others including those based on internationally-accepted specifications.

The company, is headquartered in Crawfordsville, founded in 1995, IN. Glass-reinforced polypropylene for rigidity, dimensional stability, most chemicals, lightweight, and resistance to heat, corrosion, and high impact. Integral hex nut for using a wrench to tighten the fitting. This banjo hb100 barbed hose adapter is made of glass-reinforced polypropylene and has a 1" barbed connection on one end and a 1" male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection.

Banjo HB100 Polypropylene Hose Fitting, Adapter, 1" NPT Male x 1" Barbed #ad - The barbed connection creates a tight seal on a tube or hose, and the male National Pipe Taper NPT threaded end connects with a female NPT threaded connection. The integral 1-3/8" hex nut provides a gripping surface for a wrench when tightening the fitting. This schedule 80 adapter is made of glass-reinforced polypropylene for rigidity, lightweight, heat, dimensional stability, and resistance to high impact, corrosion, and most chemicals.

Connects a hose on one end and a female NPT threaded connection on the other. The maximum working pressure for this fitting is 150 pounds per square inch psi at 70 degrees F.

More information about Banjo Corporation HB100 #ad


Similar products



WKUP F001, Garden Hose Adapter, 3/4" GHT Male x 1" NPT Male Pack of 2

#ad
#ad
WKUP F001 #ad - Connects a hose on one end and a female NPT threaded connection on the other. National pipe thread: 1-inch NPT male. Glass-reinforced polypropylene for rigidity, most chemicals, lightweight, and resistance to heat, dimensional stability, corrosion, and high impact. Integral hex nut for using a wrench to tighten the fitting.

Therefore, this garden hose adapter with the reinforced nylon and precise size will have better performance than which made of the brass material, Which makes you achieve pleasure conversion. Rubber o-rings included on both ends. Garden hose thread: 3/4-inch GHT male. Maximum working pressure of 150 psi at 70 degrees F.

WKUP F001, Garden Hose Adapter, 3/4" GHT Male x 1" NPT Male Pack of 2 #ad - Precision molding with reinforced nylon material. F001 is a stunning realization of that ideal. We rethought and repeated practice for the best material and manufacturing process of this high-quality adapter. Garden hose thread to national pipe thread. Wkup always stick to the idea that to create a garden hose adapter which is accurate and durable.

Features 3/4" ght male x 1"NPT Male Product chief 1. 515 inch 3/4" ght thread standard: ght garden hose thread Thread Size: 3/4" GHT Male Thread length: 0

More information about WKUP F001 #ad


Similar products



1" MNPT - Flotec FP13-43 Pump, Garden Hose Adapter, for Utility Pumps

#ad
#ad
Flotec FP13-43 #ad - Accessory for utility pumps 1" MNPT Male National Pipe Thread Garden Hose Adapter. Flotec fp13-43 pump, garden hose adapter, for Utility Pumps - 1" MNPT Adapter for connecting pipes or hoses of different types. Rubber o-rings included on both ends. Garden hose thread: 3/4-inch GHT male. National pipe thread: 1-inch NPT male.

1" MNPT - Flotec FP13-43 Pump, Garden Hose Adapter, for Utility Pumps #ad - Connects a hose on one end and a female NPT threaded connection on the other. Garden hose thread to national pipe thread. Glass-reinforced polypropylene for rigidity, and resistance to heat, lightweight, most chemicals, corrosion, dimensional stability, and high impact. Integral hex nut for using a wrench to tighten the fitting.

Precision molding with reinforced nylon material. Maximum working pressure of 150 psi at 70 degrees F.

More information about Flotec FP13-43 #ad


Similar products



Square D by Schneider Electric FSG2J20CP 20-40 PSI Pumptrol Water Pressure Switch

#ad
#ad
Square D by Schneider Electric FSG2J20CP #ad - Connects a hose on one end and a female NPT threaded connection on the other. Standard-action contacts open on rising pressure. Maximum working pressure of 150 psi at 70 degrees F. 1/4 in. Accessory for utility pumps 1" MNPT Male National Pipe Thread Garden Hose Adapter. Pressure connection. Adapter for connecting pipes or hoses of different types.

. 2 pole, 1/4" npsf or internal pressure connection, nema 1 enclosure, diaphragm actuated, RoHS compliant, UL/CSA Listed, NSF61-Annex G certified. Clam shell packaging. Glass-reinforced polypropylene for rigidity, lightweight, corrosion, dimensional stability, most chemicals, and resistance to heat, and high impact.

Square D by Schneider Electric FSG2J20CP 20-40 PSI Pumptrol Water Pressure Switch #ad - Integral hex nut for using a wrench to tighten the fitting. Precision molding with reinforced nylon material. National pipe thread: 1-inch NPT male. Water pump pressure switches suitable for use on all types of pumps including jet, submersible, and recriprocating. Garden hose thread: 3/4-inch GHT male. Garden hose thread to national pipe thread.

20 - 40 psi.

More information about Square D by Schneider Electric FSG2J20CP #ad


Similar products



3/4 Hp Centrifugal Electric Water Pump Pool Farm Pond Biodiesel Hoteche 1"

#ad
#ad
#ad - Precision molding with reinforced nylon material. 1/4 in. Glass-reinforced polypropylene for rigidity, lightweight, most chemicals, corrosion, and resistance to heat, dimensional stability, and high impact. Integral hex nut for using a wrench to tighten the fitting. National pipe thread: 1-inch NPT male. Connects a hose on one end and a female NPT threaded connection on the other.

Pressure connection. Maximum working pressure of 150 psi at 70 degrees F. Rated voltage 120v/60hz rated power: 3/4 hp no-load speed 3400 rpm max flow rate: 650 per hour liquid temperature up to 35° Max Suction lift 20 ft Continuous run time 2 hr and rest 10 minutes to cool pump down 1" Inlet And 1" Outlet Threaded 1 Adapter for connecting pipes or hoses of different types.

3/4 Hp Centrifugal Electric Water Pump Pool Farm Pond Biodiesel Hoteche 1" #ad - . 20-40 psi pumptroltM Water Pressure Switch. Suitable for jet pumps, submersible pumps and reciprocating pumps. Standard-action contacts open on rising pressure. Garden hose thread: 3/4-inch GHT male. Garden hose thread to national pipe thread. 20 - 40 psi. Rubber o-rings included on both ends.

More information about #ad


Similar products



Banjo HB100-90 Polypropylene Hose Fitting, 90 Degree Elbow, 1" NPT Male x 1" Barbed

#ad
#ad
Banjo Corporation #ad - 90-degree elbow for connecting tubing to a threaded connection at an angle. Standard-action contacts open on rising pressure. Range -20 degrees to 150 degrees F, Color Black ' Adapter for connecting pipes or hoses of different types. Maximum working pressure of 150 psi at 70 degrees F. Pressure 150 [email protected] Degrees F, Temp.

Banjo HB100-90 Polypropylene Hose Fitting, 90 Degree Elbow, 1" NPT Male x 1" Barbed #ad - Glass-reinforced polypropylene for rigidity, lightweight, corrosion, dimensional stability, and resistance to heat, most chemicals, and high impact. Integral hex nut for using a wrench to tighten the fitting. Glass-reinforced polypropylene for rigidity, and resistance to heat, corrosion, most chemicals, lightweight, dimensional stability, and high impact.

Integral hex nut for using a wrench to tighten the fitting. Garden hose thread: 3/4-inch GHT male. Elbow, 90 degrees, plastic, body material Polypropylene, Connection Type Barbed x MNPT, Barb Size 1 In. Pipe size 1 In. Max. 20 - 40 psi. Rubber o-rings included on both ends. Pressure connection.

More information about Banjo Corporation #ad


Similar products



1.6HP Stainless Shallow Well Pump Water Pumps Home Garden Lawn Sprinkling Booster Pump(1.6HP/115V)

#ad
#ad
Oanon #ad - Maximum working pressure of 150 psi at 70 degrees F. Pressure connection. Standard-action contacts open on rising pressure. Connects a hose on one end and a female NPT threaded connection on the other. Item: 1. 6 hp garden pump / sprinkler water pump / shallow well pump products information: Colors: Blue Types of Plug: US Plug Material: Metal and Plastic Size: 33 x 20 x 23cm/ 12.

1.6HP Stainless Shallow Well Pump Water Pumps Home Garden Lawn Sprinkling Booster Pump(1.6HP/115V) #ad - 9 x 7. 8 x 9 inchl x w x h specification: Head Max: 42m Weight: 7. 28kg 1" inlet and outlet capacity: 3200L/H Max pressure:66PSI Max. Height:42m/137ft max suction level:7m/23ft Power: 1200W/1. 6hp max flow rate: 845gph rope Length: 110cm/42. 9inch voltage/frequency:115v/60hz max liquid temperature: 55 c or 130f package content: 1 x pump, 1 x Manual Tips: 1: Both the size of inlet and outlet are 1 inch 2: There is a dewatering outlet designed for draining the left water in the machine if it will not be in use for a long term.

Precision molding with reinforced nylon material. Garden hose thread to national pipe thread. Water inlet and outlet need to be sealed up when you connect pipes. 20 - 40 psi. Maximum working pressure of 150 psi at 70 degrees F.

More information about Oanon #ad


Similar products



American Valve G31SL 3/4" Lead Free Check Valve 3/4 Inch

#ad
#ad
American Valve G31SL 3/4" #ad - 20-40 psi pumptroltM Water Pressure Switch. Inline check. Pressure connection. It may be used vertically or horizontally. The american valve g31SL is a lead-free spring check valve with female threaded ended. Accessory for utility pumps 1" MNPT Male National Pipe Thread Garden Hose Adapter. Note】-the water sprinkler pump needs to be primed at the first time and if not used in a few weeks.

200 wog water, Oil, gas. You will get the best results when the vertical distance is less than 15ft). High frequency】-66 psi water pressure makes this water pump perfect for irrigation or water transport. Rubber o-rings included on both ends. Garden hose thread: 3/4-inch GHT male. Garden hose thread to national pipe thread.

American Valve G31SL 3/4" Lead Free Check Valve 3/4 Inch #ad - Connects a hose on one end and a female NPT threaded connection on the other. Powerful power】-1200w/1. 6hp power, fan cooled continuous-duty 115 volt motor draws water up to 23 ft while 137 foot head lift provides enough water and pressure for a magnitude of jobs. Glass-reinforced polypropylene for rigidity, and resistance to heat, corrosion, most chemicals, lightweight, dimensional stability, and high impact.

Integral hex nut for using a wrench to tighten the fitting.

More information about American Valve G31SL 3/4" #ad


Similar products



ARKSEN 1.6HP 1" Shallow Well Electric Garden Pump w/Booster Type, Stainless Steel Housing, Steel Tank, Blue

#ad
#ad
ARKSEN #ad - Lightweight with the energy efficient, and oil-free design brings more convenience to your watering. Portable design】-with safe and convenient waterproof on/off switch, 110cm/42. 9inch rope length, increases the extensibility of the pump, iron Handle easy to carry, Both the size of inlet and outlet are 1 inch while one check valve and two Connectors are included, 1.

6 hp lawn pump transfers water quickly and boosts water pressure. Applications】-the pump is compatible with a tank and work as a well pump, and can be widely applied in garden and lawn, Ideal for your outdoor watering in your garden or yard and for the supply of fresh water to rural homes, also with a pressure regulator and work as a booster pump, farms, and cabins.

ARKSEN 1.6HP 1" Shallow Well Electric Garden Pump w/Booster Type, Stainless Steel Housing, Steel Tank, Blue #ad - Complies with lead-free Plumbing laws. Connects a hose on one end and a female NPT threaded connection on the other. Pump is self-priming, making it perfect for timed systems. Pump is perfect for draining, adding water pressure to houses and farm irrigation. Accessory for utility pumps 1" MNPT Male National Pipe Thread Garden Hose Adapter.

Pressure connection. May be used vertically or horizontally. Standard-action contacts open on rising pressure.

More information about ARKSEN #ad


Similar products



Signswise 600p/r Incremental Rotary Encoder Dc5-24v Wide Voltage Power Supply 6mm Shaft

#ad
#ad
Signswise #ad - Suitable for a variety of intelligent control displacement measurement, civilian measured height human scale, steel cut length control, automatic fixed-length automatic guillotine paper machine, students racing robots. Model: incremental rotary encoders, AB two phases. Light weight and small size. 700 gallon per hour rating tackles any draining job at a fraction of the tim, high flow, Self-priming design permits use on automatic sprinkler systems as well as de-watering and water transfer.

Maximum working pressure of 150 psi at 70 degrees F. Inline check. 1/4 in. Pump is perfect for draining, adding water pressure to houses and farm irrigation. Accessory for utility pumps 1" MNPT Male National Pipe Thread Garden Hose Adapter. Suitable for jet pumps, submersible pumps and reciprocating pumps. Glass-reinforced polypropylene for rigidity, dimensional stability, most chemicals, lightweight, corrosion, and resistance to heat, and high impact.

Signswise 600p/r Incremental Rotary Encoder Dc5-24v Wide Voltage Power Supply 6mm Shaft #ad - Integral hex nut for using a wrench to tighten the fitting. 1000 gallon per hour rating tackles any draining job at a fraction of the time. Connects a hose on one end and a female NPT threaded connection on the other.

More information about Signswise #ad


Similar products

Bluetooth Headphones, ELEGIANT S1 Over Ear Wireless Headset Bluetooth Hi-Fi Stereo Headphones Foldable with Mic 16-Hour Playtime Wired and Wireless Modes for iPhone Android Tablet PC and More Black

Sylvestidoso Women’s A-Line Sleeveless Pleated Little Black Cocktail Party Dress L, Black