NOGA Dial Gage Holder Magnetic Base – Model: DG61003 AUTO Power: On/Off mag.Base Holding Power: 176 Ibs Regular Duty


NOGA DG61003 - It is an auxiliary tool for any general measurement and helps to increase precision and working efficiency. Bottom arm length: 4. 33". Noga magnetic bases are capable of a 360° rotation and offer considerable versatility. Powerful 176 lbs. Easy to set up gages into required position. Fine adjustment universal swivel clamp.

Holds 3/8", 6mm, 8mm and dovetail. The articulated arm of the Noga magnetic base is capable of reaching every possible position - even upside down. On/off magnetic base. 3 dimensional dial gauge holder has unique central locking mechanism. Top arm length: 3. 98". These magnetic bases also come with fine adjustments that make them well equipped for fine operations.

More information about NOGA DG61003

Mitutoyo"2416S" Dial Indicator, 4-48 UNF Thread, 0.375" Stem Dia,"Lug Back," White Dial, 0-100 Reading, 2.244" Dial Dia, 0-1" Range, 0.001" Graduation, -0.002" Accuracy


Mitutoyo 2416S - Dial readings with three digits, such as 0-10-0, signify that the indicator has a balanced dial. Stem design provides long clamping range, no through screw-hole on the frame for dust- and water resistance, and involute curved lifting lever provides smooth movement of spindle and dovetail joint for tool-less connection.

The choice of black or white dial and a contrasting hand help make measurements easy to read. The back on most indicators can be rotated to the vertical position. Flat back dial indicators are either clamp-mounted on the stem or plate-mounted on the rear of the indicator. Lug back dial indicators have a protrusion with a hole to mount the indicator using a lug or nut and bolt.

Mitutoyo"2416S" Dial Indicator, 4-48 UNF Thread, 0.375" Stem Dia,"Lug Back," White Dial, 0-100 Reading, 2.244" Dial Dia, 0-1" Range, 0.001" Graduation, -0.002" Accuracy - The indicator has a 0375" diameter stem, a #4-48 unf contact point thread mount, and is used to measure surface variations in fractional inches. The dial indicator comes with a choice of flat or lug back for a variety of mounting options. Balanced dials are used to read the difference from a specific surface reference point.

These precision measuring tools are used to accurately measure small linear distances and object sizes. The mitutoyo dial indicator has a black or white face, a choice of flat or lug, a 0375" stem diameter, and inch measurements.

More information about Mitutoyo 2416S


Similar products



Mitutoyo 513-402, .0005" X .030" Horizontal Test Indicator, 0-15-0


Mitutoyo 513-402 - Mitutoyo horizontal Test Indicator, Graduations:. 0005", range:. 030", dial face: 0-15-0, includes: Test indicator, .079" carbide contact point, 3/8" stem, clamp nut Standard dial indicator with a 0375" diameter stem, and choice of white or black face, a #4-48 UNF contact point thread mount, for measuring surface variations in fractional inches.

Units displayed in fractional inches, and has a rotating bezel and limit markers. Carbide contact point. Choice of flat or lug back for a variety of mounting options. Stem design provides long clamping range, no through screw-hole on the frame for dust- and water resistance, and involute curved lifting lever provides smooth movement of spindle and dovetail joint for tool-less connection.

Mitutoyo 513-402, .0005" X .030" Horizontal Test Indicator, 0-15-0 - Auto-reverse no clutch lever. Meets ansi standards, japanese industrial standard jis B7503-1997, and American Gage Design AGD standards for face and thread size, and bezel and stem diameter. Jeweled bearings. Glare free, scratch resistant crystal. Supplied in fitted plastic case.

More information about Mitutoyo 513-402


Similar products



Mitutoyo 050101, Edge Finder, 3/8" Dia. Shank, .200" Dia. Tip


Mitutoyo 50101 - Supplied in fitted plastic case. Carbide contact point. Auto-reverse no clutch lever. All working surfaces are hardened and ground. Standard dial indicator with a 0375" diameter stem, and choice of white or black face, a #4-48 UNF contact point thread mount, for measuring surface variations in fractional inches.

Units displayed in fractional inches, and has a rotating bezel and limit markers. Mitutoyo edge finder, shank Dia: 3/8", Tip Dia:. 200". Stem design provides long clamping range, no through screw-hole on the frame for dust- and water resistance, and involute curved lifting lever provides smooth movement of spindle and dovetail joint for tool-less connection.

Mitutoyo 050101, Edge Finder, 3/8" Dia. Shank, .200" Dia. Tip - Meets ansi standards, japanese industrial standard jis B7503-1997, and American Gage Design AGD standards for face and thread size, and bezel and stem diameter. Jeweled bearings. Glare free, scratch resistant crystal. Used in a milling machine to find the workpiece edge. Choice of flat or lug back for a variety of mounting options.

More information about Mitutoyo 50101


Similar products



Mighty Mag Magnetic Base


Magnetic Bases - Choice of flat or lug back for a variety of mounting options. Glare free, scratch resistant crystal. Stem design provides long clamping range, no through screw-hole on the frame for dust- and water resistance, and involute curved lifting lever provides smooth movement of spindle and dovetail joint for tool-less connection.

Mounts in 6 positions. Made in USA. Auto-reverse no clutch lever. Magnet always on. All working surfaces are hardened and ground. Solid Magnetic Base. Solid 45 lb. Carbide contact point. 1" x 1 1/4" x 4 1/2". Used in a milling machine to find the workpiece edge. Meets ansi standards, and american gage design AGD standards for face and thread size, japanese industrial standard jis B7503-1997, and bezel and stem diameter.

Mighty Mag Magnetic Base - Jeweled bearings. Supplied in fitted plastic case. Standard dial indicator with a 0375" diameter stem, and choice of white or black face, a #4-48 UNF contact point thread mount, for measuring surface variations in fractional inches. Units displayed in fractional inches, and has a rotating bezel and limit markers.

More information about Magnetic Bases


Similar products



Model: NF1022 - Noga NogaFlex Holder


Noga NF1022 - Supplied in fitted plastic case. Made in USA. Solid Magnetic Base. All working surfaces are hardened and ground. Glare free, scratch resistant crystal. Meets ansi standards, and american gage design AGD standards for face and thread size, japanese industrial standard jis B7503-1997, and bezel and stem diameter.

Jeweled bearings. Used in a milling machine to find the workpiece edge. Choice of flat or lug back for a variety of mounting options. Most useful for centering holes on milling machines. Test indicator holder arm with 8mm diameter x 40mm long stem. Stem length: 40 mm. Indicator holder, screw type knob, Holes 6mm, 8mm, Snug Yes, 3/8 In.

Model: NF1022 - Noga NogaFlex Holder - Includes rod, finish unfinished, construction Steel, Features Measuring Insert, Arms and Top Fine Adjustment' Standard dial indicator with a 0.375" diameter stem, and choice of white or black face, a #4-48 UNF contact point thread mount, for measuring surface variations in fractional inches. Units displayed in fractional inches, and has a rotating bezel and limit markers.

Auto-reverse no clutch lever. Stem design provides long clamping range, no through screw-hole on the frame for dust- and water resistance, and involute curved lifting lever provides smooth movement of spindle and dovetail joint for tool-less connection.

More information about Noga NF1022


Similar products



Machinist's Thin Parallel Bar Set - 10 Pair 1/8" X 6"


TFT Tools - Each parallel is 1/8" thick x 6" long with 2 holes. Includes 10 pairs of the following heights: 1/2", 1", 1-1/4", 5/8", 7/8", 1-3/8", 3/4", 1-1/8", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened.

Meets ansi standards, and american gage design AGD standards for face and thread size, japanese industrial standard jis B7503-1997, and bezel and stem diameter. Jeweled bearings. Most useful for centering holes on milling machines. Test indicator holder arm with 8mm diameter x 40mm long stem. Stem length: 40 mm.

Machinist's Thin Parallel Bar Set - 10 Pair 1/8" X 6" - Supplied in fitted plastic case. Stem design provides long clamping range, no through screw-hole on the frame for dust- and water resistance, and involute curved lifting lever provides smooth movement of spindle and dovetail joint for tool-less connection. Thin parallel set 1/8" 10 Pair 00003" steel standard dial indicator with a 0

375" diameter stem, and choice of white or black face, a #4-48 UNF contact point thread mount, for measuring surface variations in fractional inches. Units displayed in fractional inches, and has a rotating bezel and limit markers.

More information about TFT Tools


Similar products



Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip


Mitutoyo 50103 - Used in a milling machine to find the workpiece edge. Most useful for centering holes on milling machines. Test indicator holder arm with 8mm diameter x 40mm long stem. Stem length: 40 mm. Auto-reverse no clutch lever. All working surfaces are hardened and ground. Solid Magnetic Base. Standard dial indicator with a 0

375" diameter stem, and choice of white or black face, a #4-48 UNF contact point thread mount, for measuring surface variations in fractional inches. Units displayed in fractional inches, and has a rotating bezel and limit markers. Includes 10 pairs of the following heights: 1/2", 1-1/8", 3/4", 5/8", 1-3/8", 7/8", 1", 1-1/4", 1-1/2" & 1-5/8".

Mitutoyo 050103, Edge/Center Finder, 3/8" Diameter Shank, 0.200" Diameter Tip - Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened. All working surfaces are hardened and ground. Made in USA. Supplied in fitted plastic case.

Our part # all-54100 Used in a milling machine to find the workpiece edge.

More information about Mitutoyo 50103


Similar products



Anytime Tools Dial/Digital Indicator Extension Stem Rod Set 6 piece 1", 2", 3", 4", 5", 6" Combine to 0-21"


Anytime Tools - Glare free, scratch resistant crystal. This precision dial Indicator Extensions allow you to extend the reach of most any dial indicator. Most useful for centering holes on milling machines. Test indicator holder arm with 8mm diameter x 40mm long stem. Stem length: 40 mm. Extend your indicator up to 21" with this set.

Includes 10 pairs of the following heights: 1/2", 1-1/4", 1", 7/8", 1-1/8", 5/8", 1-3/8", 3/4", 1-1/2" & 1-5/8". Made from high quality tool steel- stress relieved against distortion, precision ground and hardened Parallel and accurate within +/-. 0002" and made from high quality tool steel- stress relieved against distortion, precision ground and hardened.

Anytime Tools Dial/Digital Indicator Extension Stem Rod Set 6 piece 1", 2", 3", 4", 5", 6" Combine to 0-21" - Solid Magnetic Base. Meets ansi standards, japanese industrial standard jis B7503-1997, and American Gage Design AGD standards for face and thread size, and bezel and stem diameter. Jeweled bearings. Supplied in fitted plastic case. All working surfaces are hardened and ground. Choice of flat or lug back for a variety of mounting options.

Make any combination up to a total of 21". Features: 6 extension rods in lengths 1", 4", 5", 2", 3", 6".

More information about Anytime Tools


Similar products



Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET


Anytime Tools AT200536 - Most useful for centering holes on milling machines. Test indicator holder arm with 8mm diameter x 40mm long stem. Stem length: 40 mm. Our part # all-54100 All working surfaces are hardened and ground. Includes 6 pieces in lengths 1", 2", 4", 3", 5", 6". Used in a milling machine to find the workpiece edge. Glare free, scratch resistant crystal.

. Made in USA. Auto-reverse no clutch lever. Each parallel is 1/8" thick x 6" long with 2 holes. Meets ansi standards, and american gage design AGD standards for face and thread size, japanese industrial standard jis B7503-1997, and bezel and stem diameter. Jeweled bearings. Top quality M2 HSS. Standard dial indicator with a 0

Anytime Tools 5 Lathe Mill CENTER DRILL COUNTERSINK Bit Tooling SET - 375" diameter stem, a #4-48 unf contact point thread mount, and choice of white or black face, for measuring surface variations in fractional inches. Units displayed in fractional inches, and has a rotating bezel and limit markers. All working surfaces are hardened and ground. Carbide contact point. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line.

More information about Anytime Tools AT200536


Similar products



Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide


Hexagon Metrology 599-792-30 - Case-hardened steel with knurled body for durability and secure handling. Stem design provides long clamping range, no through screw-hole on the frame for dust- and water resistance, and involute curved lifting lever provides smooth movement of spindle and dovetail joint for tool-less connection. The tap includes a black plastic case.

Brown & sharpe manufactures precision measuring equipment and metrology hand tools. Sizes 1, 2, 3, 4 and 5, 60° tip angles. Adjustable spring-tensioned tap guide is used with a tap to thread holes in machining operations. Meets ansi standards, japanese industrial standard jis B7503-1997, and American Gage Design AGD standards for face and thread size, and bezel and stem diameter.

Brown & Sharpe 599-792-30 Adjustable Spring Tensioned Tap Guide - Jeweled bearings. All working surfaces are hardened and ground. Make any combination up to a total of 21". Easy positioning, tight hold. 4-48 standard indicator tip thread. Centerfinder end is used to find hole centers, and aline the spindle with a punch mark or scribed line. Tap guide aligns tap with the center of the hole and maintains the tap at a right angle.

Solid Magnetic Base.

More information about Hexagon Metrology 599-792-30


Similar products

World of Eric Carle, The Very Hungry Caterpillar Wood Recorder

Bandai Hobby RG MSN-06S Sinanju Gundam UC Action Figure 1/144 Scale