Curt Manufacturing 11276 Trailer Hitch

#ad
#ad
Curt Manufacturing 11276 #ad - Made with a vehicle-specific design for a custom fit. Constructed with a sleek, round-tube main body. It features a round tube frame and comes with a hitch pin and clip and all necessary installation hardware. Each curt class 1 hitch is co-cured with a liquid Bonderite coating and a high-gloss black powder coat finish that provide a lasting defense against rust, wear and harmful UV rays.

Protected by a durable high-gloss black powder coat finish. Tested to meet the strict demands of the industry, this CURT class 1 hitch has a capacity to tow up to 2, 000 lbs. Of tongue weight. This means it can handle a variety of small trailers such as single-axle utility trailers, canoe and kayak trailers, dirt bike trailers and more.

Curt Manufacturing 11276 Trailer Hitch #ad - Tested for safety in accordance with SAE J684. This particular hitch is designed to be a custom-fit trailer hitch for certain years of the Toyota Prius sedan, Toyota Prius Plug-In or Toyota Prius V to verify your vehicle compatibility, see the CURT application guide at curtmfg. Com. It can also accept a hitch-mounted cargo carrier or bike rack, making it a very useful addition to cars with limited cargo space NOTE: Never exceed the lowest weight capacity of any towing component; i.

E. Like all curt receiver hitches, this class 1 hitch is made right here in the USA and is backed by a one-year finish warranty and a limited lifetime warranty.

More information about Curt Manufacturing 11276 #ad

Curt Manufacturing 56147 Trailer Connector

#ad
#ad
Curt Manufacturing 56147 #ad - Curt custom wiring harnesses are long-lasting and quick to install. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. A curt custom wiring harness also called a T-connector is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring.

Most vehicles do not come ready to tow. Plugs into vehicle tail light assembly to provide a 4-way flat socket. They come with dust covers to keep your connector clean when not in use and feature a one-year limited warranty to give you peace of mind. Simple plug-and-play design eliminates the need for cutting or splicing.

Curt Manufacturing 56147 Trailer Connector #ad - 4-way flat output connects tail lights, brake lights and turn signals. This is where cURT's custom wiring harnesses come into play. It is designed to be a custom wiring harness for certain years of the Toyota Prius to verify your vehicle compatibility, see the CURT application guide at curtmfg. Com. Our custom wiring harnesses use two or more OEM connectors to plug in at the taillight assembly and provide a standard trailer socket to allow a trailer to be plugged into your vehicle's power system.

This harness provides a 4-way flat connector socket and comes with a circuit-protected converter.

More information about Curt Manufacturing 56147 #ad


Similar products



Curt Manufacturing 18110 Tray-Style Cargo Carrier

#ad
#ad
Curt Manufacturing 18110 #ad - Mesh base for easy cleanup. Angled shank elevates carrier for more ground clearance. The hitch-mounted design also makes installation quick and easy. Curt introduces the mesh, bolt-together, tray-style cargo carrier. They have holes along the outer edge for mounting a cargo net or bungees, making it easy to keep items secure, and they provide plenty of space to make your trip more comfortable, no matter where you are headed.

It offers a total storage area of 48" x 20". Curt tray-style cargo carriers are versatile and simple to use. Plugs into vehicle tail light assembly to provide a 4-way flat socket. Of cargo and also features a bent shank to raise the carrier off the ground and provide more clearance. The advantage of a hitch-mounted cargo carrier is that it can be mounted on the rear or front end of a vehicle as long as the vehicle is properly equipped with the right receiver hitch.

Curt Manufacturing 18110 Tray-Style Cargo Carrier #ad - Mounting a cargo carrier in the front opens up the rear receiver hitch for towing a trailer or adding a second carrier or bike rack if needed. This carrier features a lightweight aluminum design to put less strain on your vehicle and resist rust and corrosion from outdoor exposure. 4-way flat output connects tail lights, brake lights and turn signals.

. Even with the roomiest of vehicles, packing the car for a long trip can quickly turn into a frustrating game of Tetris.

More information about Curt Manufacturing 18110 #ad


Similar products



Swagman XC Cross-Country 2-Bike Hitch Mount Rack 1/1/4 and 2-Inch Receiver

#ad
#ad
Swagman Bicycle Carriers 64650 #ad - Locking hitch pin and security cable are available sold separately. Center arm folds down to allow access to the rear-of-vehicle without removing the rack. The rack comes with a built-in anti-wobble hitch device. Locking hitch pin 1/2 inch and 10mm security cable sold separately 64031. Cushioned hooks are adjustable for different sized bikes and ratchet down for a tight fit.

Frees up space inside the vehicle for passengers and cargo. Fat tire wheel trays sold separately 64674. The frame grip arms are coated with a soft-frame-friendly finish to protect the bike. The rack folds up for compact and easy storage. Transports up to 2 bikes, compatible with 1 1/4" and 2" receiver hitch also has a built in anti woble hitch device.

Swagman XC Cross-Country 2-Bike Hitch Mount Rack 1/1/4 and 2-Inch Receiver #ad - Takes only a few minutes to assemble. Upright ratcheting arms easily adjust to different bike frame sizes. Angled shank elevates carrier for more ground clearance. Plugs into vehicle tail light assembly to provide a 4-way flat socket. This bike carrier provides a stress-free way to transport your bikes. Upright ratchet arms easily adjust to different bike frame sizes, will accommodate bike frames up to 59 cm.

Center arm folds down to allow access to the rear of the vehicle without removing the rack.

More information about Swagman Bicycle Carriers 64650 #ad


Similar products



Curt Manufacturing 18050 Towing Wiring

#ad
#ad
Curt Manufacturing 18050 #ad - Features a generous 61" length. Fat tire wheel trays sold separately 64674. 4-way flat output connects tail lights, brake lights and turn signals. Takes only a few minutes to assemble. Center arm folds down to allow access to the rear-of-vehicle without removing the rack. Required for all 1 1/4" hitch-mounted bike racks.

Though the bike rack support strap is required for any bike rack with a 1 1/4" shank, it is recommended for all CURT bike racks. Adapter sleeve allows mounting on either 1 1/4" or 2" receiver tube. Simple plug-and-play design eliminates the need for cutting or splicing. Mesh base for easy cleanup. Constructed with SMT circuitry for better performance and durability.

Curt Manufacturing 18050 Towing Wiring #ad - Transports up to 2 bikes, compatible with 1 1/4" and 2" receiver hitch also has a built in anti woble hitch device. Max load capacity: 35lbs per bike. Provides added stability and support for a hitch-mounted bike rack. Locking hitch pin 1/2 inch and 10mm security cable sold separately 64031. Plugs into vehicle tail light assembly to provide a 4-way flat socket.

Recommended for all hitch-mounted bike racks.

More information about Curt Manufacturing 18050 #ad


Similar products



Curt Manufacturing 56156 Trailer Connector

#ad
#ad
Curt Manufacturing 56156 #ad - Curt custom wiring harnesses are long-lasting and quick to install. It is designed to be a custom wiring harness for certain years of the Toyota Prius V to verify your vehicle compatibility, see the CURT application guide at curtmfg. Com. Takes only a few minutes to assemble. Center arm folds down to allow access to the rear-of-vehicle without removing the rack.

Angled shank elevates carrier for more ground clearance. Custom wiring harnesses plug into your vehicle's electrical system using original equipment OEM connectors. Max load capacity: 35lbs per bike. Adapter sleeve allows mounting on either 1 1/4" or 2" receiver tube. Locking hitch pin 1/2 inch and 10mm security cable sold separately 64031.

Curt Manufacturing 56156 Trailer Connector #ad - Mesh base for easy cleanup. Upright ratcheting arms easily adjust to different bike frame sizes. This is where cURT's custom wiring harnesses come into play. Upright ratchet arms easily adjust to different bike frame sizes, will accommodate bike frames up to 59 cm. Center arm folds down to allow access to the rear of the vehicle without removing the rack.

Fits 20' to 29" tire sizes. Fat tire wheel trays sold separately 64674.

More information about Curt Manufacturing 56156 #ad


Similar products



MaxxHaul 70032 1-1/4 inches to 2 inches Hitch Adaptor

#ad
#ad
Maxxtow Towing Products 70032 #ad - Features a generous 61" length. Our maxxhaul hitch adaptor converts your 1-1/4 inch receiver to accept 2 inch hitch mount accessories. Plugs into vehicle tail light assembly to provide a 4-way flat socket. Distance from center of pin hole to pin hole: 6-1/2". Simple plug-and-play design eliminates the need for cutting or splicing.

Maximum tongue weight capacity: 350 pounds. Transports up to 2 bikes, compatible with 1 1/4" and 2" receiver hitch also has a built in anti woble hitch device. Two-piece design easily bolts together for quick assembly. Fits a 1-1/4" and 2" hitch reciever. Mesh base for easy cleanup. Provides added stability and support for a hitch-mounted bike rack.

MaxxHaul 70032 1-1/4 inches to 2 inches Hitch Adaptor #ad - 4-way flat output connects tail lights, brake lights and turn signals. Center arm folds down to allow access to the rear-of-vehicle without removing the rack. Recommended for all hitch-mounted bike racks. Equipped with a powered 3-wire to 2-wire tail light converter. Upright ratcheting arms easily adjust to different bike frame sizes.

Equipped with a powered 3-wire to 2-wire tail light converter.

More information about Maxxtow Towing Products 70032 #ad


Similar products



Curt Manufacturing 45024 Towing Wiring

#ad
#ad
Curt Manufacturing 45024 #ad - Two-piece design easily bolts together for quick assembly. Maximum tongue weight capacity: 350 pounds. Max load capacity: 35lbs per bike. Features a generous 61" length. To protect our class 1 ball mounts from corrosion, UV damage and scratches, we coat each one in a powder coat of high-gloss black for a sharp finish.

Required for all 1 1/4" hitch-mounted bike racks. 4-way flat output connects tail lights, brake lights and turn signals. Curt class 1 ball mounts are designed to complement our class 1 trailer hitches and come in several different styles, offering a range of shank lengths and drop and rise options. Simple plug-and-play design eliminates the need for cutting or splicing.

Curt Manufacturing 45024 Towing Wiring #ad - Provides added stability and support for a hitch-mounted bike rack. Upright ratcheting arms easily adjust to different bike frame sizes. 4-way flat output connects tail lights, brake lights and turn signals. Carries up to 2 bikes. Locking hitch pin 1/2 inch and 10mm security cable sold separately 64031. Simple plug-and-play design eliminates the need for cutting or splicing.

Center arm folds down to allow access to the rear-of-vehicle without removing the rack. Cnc-formed, robotically welded and mechanically descaled for a perfect fit.

More information about Curt Manufacturing 45024 #ad


Similar products



Allen Sports 3-Bike Hitch Mount Rack with 1.25/2-Inch Receiver

#ad
#ad
Allen Sports 532RR #ad - All retainers clips attached w/ lanyards. Folding carry arms quickly drop out of the way when rack is not in use. Black power coat finish. Angled shank elevates carrier for more ground clearance. Only fits class II receiver hitch. Features a generous 61" length. Simple plug-and-play design eliminates the need for cutting or splicing.

Recommended for all hitch-mounted bike racks. Locking hitch pin 1/2 inch and 10mm security cable sold separately 64031. Fits a 1-1/4" and 2" hitch reciever. 3-bike rack fits vehicles with either a 1. 25 or 2-inch trailer hitch. Rack sets up and installs in less than 5 minutes. 5" rise for precise trailer leveling.

Allen Sports 3-Bike Hitch Mount Rack with 1.25/2-Inch Receiver #ad - 16-inch long carry arms individually secure bicycles with Allen's patented tie-down system. Upright ratcheting arms easily adjust to different bike frame sizes. Minor assembly required. Center arm folds down to allow access to the rear-of-vehicle without removing the rack. 4-way flat output connects tail lights, brake lights and turn signals.

Adapter sleeve allows mounting on either 1 1/4" or 2" receiver tube.

More information about Allen Sports 532RR #ad


Similar products



Curt Manufacturing 45562 Towing Wiring

#ad
#ad
Curt Manufacturing 45562 #ad - Provides added stability and support for a hitch-mounted bike rack. Designed to replace a common, old-style ball mount, each CURT Euro Mount is faster and easier to install with its permanently installed trailer ball. Folding carry arms quickly drop out of the way when rack is not in use. Max load 35lbs per bike.

To give it an added edge over other light-duty ball mounts, this Euro Mount comes with a durable black carbide powder coat for superior corrosion and scratch resistance. Hardened pin-mounted trailer ball accepts a 2" coupler. Receiver size: 1-1/4 inch to 2 inch. Cnc-formed, robotically welded and mechanically descaled for a perfect fit.

Curt Manufacturing 45562 Towing Wiring #ad - Constructed with SMT circuitry for better performance and durability. Transports up to 2 bikes, compatible with 1 1/4" and 2" receiver hitch also has a built in anti woble hitch device. Carries up to 2 bikes. Simple plug-and-play design eliminates the need for cutting or splicing. Max load capacity: 35lbs per bike.

4-way flat output connects tail lights, brake lights and turn signals. Not to be used for towing. Equipped with a 3/4" hole to accept a trailer ball shank.

More information about Curt Manufacturing 45562 #ad


Similar products



Swagman Anti-wobble 1/2" Threaded Hitch Pin and 8' Cable

#ad
#ad
Swagman Bicycle Carriers 64031 #ad - Upright ratchet arms easily adjust to different bike frame sizes, will accommodate bike frames up to 59 cm. Center arm folds down to allow access to the rear of the vehicle without removing the rack. Fits 20' to 29" tire sizes. Fat tire wheel trays sold separately 64674. For use with swagman Universal Racks fits 1-1/4" threaded receiver bar.

Installs easily with no tools or torque specifications required. 4-way flat output connects tail lights, brake lights and turn signals. Fits a 1-1/4" and 2" hitch reciever. Max load capacity: 35lbs per bike. 10mm braided steel security cable locks your bikes to your bike rack. Provides added stability and support for a hitch-mounted bike rack.

Swagman Anti-wobble 1/2" Threaded Hitch Pin and 8' Cable #ad - Equipped with a 3/4" hole to accept a trailer ball shank. Distance from center of pin hole to pin hole: 6-1/2". Shank protected by a highly durable carbide powder coat finish. Center arm folds down to allow access to the rear-of-vehicle without removing the rack. Constructed with SMT circuitry for better performance and durability.

Mesh base for easy cleanup.

More information about Swagman Bicycle Carriers 64031 #ad


Similar products

Zoku Individual Character Pops, Kitty Ice Pop Mold, Easy-Release Silicone Design, Single Unit

Mueller Ice Bag, Blue, 9 Inch