BETAFPV 5pcs Tiny Whoop Plastic Canopy Blue and Transpartent for FPV Tiny Whoop Frame


BETAFPV - Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 5pcs tiny whoop blue plastic canopy for fpv tiny whoop Frame This Tiny Whoop Blue Plastic Canopy is still low enough to look down between the ducts to drop thru small slots or gaps.

All stock hardware is used, super simple installation. Package including 3 * blue tiny whoop plastic canopy2 * Transparent Tiny Whoop Plastic Canopy This tiny whoop blue plastic Canopy is still low enough to look down between the ducts to drop thru small slots or gaps. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

BETAFPV 5pcs Tiny Whoop Plastic Canopy Blue and Transpartent for FPV Tiny Whoop Frame - All stock hardware is used, super simple installation. Package including: 3 * blue Plastic Canopy, 2 * Transparent Plastic Canopy.

More information about BETAFPV

FPV Camera BETAFPV Z01 AIO FPV Cam with OSD 5.8G 40CH 25mW VTX for Tiny Whoop Blade Inductrix


BETAFPV 4335041644 - Press band/Channel button once to change channel. Specification:output power: 25mW Supply Voltage: 2. 9-5. 5v size : 47*14. 8*12. 5 mm weight: 3. 6g antenna:dipole whip high sensitivity antenna Frequency: 5. 8ghz 5 bands 40 channels, with raceband: 5362~5945mhz field of view: 120 degrees antenna port: 50 Ω sensor: ntsc 640x480 lens angel: h:120°/v:100° Package: 1 * BETAFPV Z01 AIO FPV Camera 2 * Pins Native osd connector, Z shape design to withstand worst crashes on dipole antenna.

Band leds will skip to next one accordingly. Channel leds will skip to next one after single press. 2. Press and hold button for 4 seconds to change frequency band. 5. 8g fpv dipole whip high sensitivity antenna, no problem with range or durability. With the betafpv f3 flight controller, you could assemble the FC tower for you Tiny Whoop and no pigtail needed.

FPV Camera BETAFPV Z01 AIO FPV Cam with OSD 5.8G 40CH 25mW VTX for Tiny Whoop Blade Inductrix - 8 leds display channel and 6 LEDs display frequency group information. Positioning pins designed to fit with BETAFPV F3 FC, no pigtail needed. How to change the 5. 8g frequency: 1.

More information about BETAFPV 4335041644


Similar products



BETAFPV 4 Sets 3-blade 40mm Props 1.0mm shaft for Quadcopter Beta75 BNF Tiny Whoop


BETAFPV - The shaft is 1. 0mm and fit for 7x20mm coreless brushed motors well. Positioning pins designed to fit with BETAFPV F3 FC, no pigtail needed. 5. 8g fpv dipole whip high sensitivity antenna, no problem with range or durability. 8 leds display channel and 6 LEDs display frequency group information. 120 degree wide lens angle and miniature and light weight design.

Random color:red, Blue, Pink, Yellow, White. Smaller inertia and more power violent. These props only fit for betafpv 75mm airframe, NOT used for 65mm Tiny Whoop airframe. Specification: product material: Plastic Diameter: 40mm Inner diameter: 1. 0mm shaft Weight: 04g/piece random color:red, blue package: 8 * cw 3-blade 40mm props 8 * ccW 3-blade 40mm props Random 4 colors Native osd connector, Pink, Yellow, Z shape design to withstand worst crashes on dipole antenna.

BETAFPV 4 Sets 3-blade 40mm Props 1.0mm shaft for Quadcopter Beta75 BNF Tiny Whoop - Only 04g and lighter enough. 16 pcs of betafpv 3-blade 40mm Props Tiny Whoop. These props are designed for BETAFPV 75mm airframe.

More information about BETAFPV


Similar products



BETAFPV 2pcs Beta65S 65mm Whoop Frame Kit Upgrade Version for LED Light Compatible for 7X16mm Motor


BETAFPV - Random color:red, Blue, Pink, Yellow, White. Smaller inertia and more power violent. Betafpv 2pcs beta65s 65mm whoop frame kit upgrade version compatible for 7*16mm motor specifications: frame base: 65mm wheelbase distance Frame motor holder: 7x16mm coreless motors Frame Color: Transparent white Propeller: 3-blades 31mm props Package: 2 * Beta65S 65mm frame Native osd connector, Z shape design to withstand worst crashes on dipole antenna.

These props only fit for betafpv 75mm airframe, NOT used for 65mm Tiny Whoop airframe. The 4 mounting columns could fit the whoop FC completely. No need to cut the column on the rear. 8 leds display channel and 6 LEDs display frequency group information. With 65mm wheelbase distance and 7x16mm motor holder. 120 degree wide lens angle and miniature and light weight design.

BETAFPV 2pcs Beta65S 65mm Whoop Frame Kit Upgrade Version for LED Light Compatible for 7X16mm Motor - . Only 04g and lighter enough. 16 pcs of betafpv 3-blade 40mm Props Tiny Whoop. Also you could use the dampers in hte frame. 5.

More information about BETAFPV


Similar products



BETAFPV Beta65S 65mm Whoop Frame with 7x16mm 17500KV Brushed Motors Upgrade Version for LED Light


BETAFPV - The 4 mounting columns could fit the whoop FC completely. 120 degree wide lens angle and miniature and light weight design. The 4 mounting columns could fit the whoop FC completely. It works with the inductrix fc, the inductrix FPV Pro FC, the Inductrix FPV FC, and all Betaflight Whoop style FCs. Also you could use the dampers in hte frame.

No need to cut the column on the rear. Also you could use the dampers in hte frame. Specifications: beta65s frame frame base: 65mm wheelbase distance frame motor holder: 7x16mm coreless motors Frame Color: Transparent white Propeller: 3-blades 31mm props 7x16mm 17500KV Size: 7x16mm Width:7mm Height: 16mm Cable length: 60mm Shaft Diameter: 0

BETAFPV Beta65S 65mm Whoop Frame with 7x16mm 17500KV Brushed Motors Upgrade Version for LED Light - 8mm weight: 2. 9g including cables and connector Speed: 17500kv or 56000RPM / 3. 2v connector: JST 1. 25mm 2p connector note:this is a 7x16mm motor, it does not fit the regular Whoop frames! Only BETAFPV Beta65S frame and Eachine E011 frame fit for these motors for the moment. Random color:red, Pink, Blue, Yellow, White.

Smaller inertia and more power violent. It does not fit the regular Whoop frames. The 716 motor with jst 1.

More information about BETAFPV


Similar products



BETAFPV 8pcs 260mAh HV 1S Lipo Battery 30C 4.35V with JST-PH 2.0 Powerwhoop Connector for Tiny Whoop Blade Inductrix


BETAFPV - These motors give this quad more power and more flight time than your regular 6mm Whoop. The frame is made of the same material as the stock Inductrix, but even lighter and more durable. Use this as a spare frame for your eachine E011 drone, or to DIY your own Tiny Whoop drone with 7x16mm motors. This frame works with the inductrix fc, the inductrix FPV Pro FC, the Inductrix FPV FC, and all Betaflight Whoop style FCs.

No need to modify the battery slot. If your batteries get puffed, or over-discharge. It does not fit the regular Whoop frames. The 716 motor with jst 1. 25mm 2p connector is pecfect for Blade Inductrix, Tiny Whoop flight controller, whose weight is 2. 9g including cables and connector. No need to modify the battery slot.

BETAFPV 8pcs 260mAh HV 1S Lipo Battery 30C 4.35V with JST-PH 2.0 Powerwhoop Connector for Tiny Whoop Blade Inductrix - 120 degree wide lens angle and miniature and light weight design. Powerwhoop connector means that you will experience more power and longer flight times from the same size battery! Specification: Item: 260mAh HV 1S Lipo BatteryRate: 30C Dimension: 6mm * 12mm * 52mm Weight: 6. 90g/per unit capacity: 260mAh 30C 4.

35vthe connector plug: Micro JST 2. 0, aka powerwhoop connector package: 8 * 260mAh HV 1S Lipo Battery 30C 4.

More information about BETAFPV


Similar products



BETAFPV 4pcs 550mAh 1S HV 3.8V LiPo Battery 50C JST2.0 Connector Upgraded for Micro FPV Racing Drone like Inductrix FPV Plus Beta75 Brushed BNF Beta75 Pro Brushless Drone etc


BETAFPV - With 65mm wheelbase distance and 7x16mm motor holder. Betafpv 4pc 550mah upgraded 1S HV 3. 8v lipo battery 50c JST-PH 2. 0 powerwhoop connector for micro fpv racing drone like inductrix fpv plus etc Specification: Item: 550mAh HV Lipo Battry 1S 50C Capacity: 550mAh Size: 57*15*7. 5mm continuous discharge rate: 50c/100c weight: 13g/PCS Note: The upgraded batteries only different in package, same quality and application, please feel free to purchase.

Don't throw it into water. Safer, higher quality and more powerful rate brings you higher speed flying experience. These props only fit for betafpv 75mm airframe, NOT used for 65mm Tiny Whoop airframe. No need to cut the column on the rear. Don't throw it into fire. No need to add a foam adapter. The beta65s frame with 65mm wheelbase distance and 7x16mm motor holder is made of the same material as the stock Inductrix, which is lighter and more durable.

BETAFPV 4pcs 550mAh 1S HV 3.8V LiPo Battery 50C JST2.0 Connector Upgraded for Micro FPV Racing Drone like Inductrix FPV Plus Beta75 Brushed BNF Beta75 Pro Brushless Drone etc - Using the most powerfull 7x16mm motors with up to17500kv value, 56000RPM / 3. 2v which can give this quad more power and more flight time than your regular 6mm Whoop. These 7x16mm motors only fit for betafpv beta65S frame and Eachine E011 frame for the moment. Due to the difference between the measurement, the battery dimension and weight may have little error.

More information about BETAFPV


Similar products



BETAFPV BetaCube F3 V2 FC Frsky Rx AIO 5.8G VTX Camera for Tiny Whoop Quads like Beta75S BNF


BETAFPV - Soldering is elimnated and it's all plug and play. The beta65s frame with 65mm wheelbase distance and 7x16mm motor holder is made of the same material as the stock Inductrix, which is lighter and more durable. Using the most powerfull 7x16mm motors with up to17500kv value, 56000RPM / 3. 2v which can give this quad more power and more flight time than your regular 6mm Whoop.

These 7x16mm motors only fit for betafpv beta65S frame and Eachine E011 frame for the moment. A customed plastic holder is made in this newest version. 5. 8g fpv dipole whip high sensitivity antenna, no problem with range or durability. Description:This is the upgraded version of Betacube. Also you could use the dampers in hte frame.

BETAFPV BetaCube F3 V2 FC Frsky Rx AIO 5.8G VTX Camera for Tiny Whoop Quads like Beta75S BNF - Tiny whoop blade inductrix great choice of battery with the connector plug of JST-PH2. 0 powerWhoop connnector. The weight of the betafpv 260 mah hv lipo battery is approx 6. 90g per unit, 06g heavier than the 230mAh battery, the capacity is 30C 4. 35v.

More information about BETAFPV


Similar products



BETAFPV 4 Sets 3-blade Props 31mm 0.8mm Shaft for 615 Motor Tiny Whoop Quad like Beta65


BETAFPV - The 4 mounting columns could fit the whoop FC completely. These motors give this quad more power and more flight time than your regular 6mm Whoop. The frame is made of the same material as the stock Inductrix, but even lighter and more durable. Use this as a spare frame for your eachine E011 drone, or to DIY your own Tiny Whoop drone with 7x16mm motors.

This frame works with the inductrix fc, the Inductrix FPV FC, the inductrix FPV Pro FC, and all Betaflight Whoop style FCs. No need to modify the battery slot. The last one is the defection of the battery. The battery connector is micro jst 2. 0, not work with stock blade inductrix, blade nano QX, Nano CPX, Blade mCX etc.

Betafpv 550mah 1s battery with the connector of jst-ph 2. 0 aka powerwhoop mcpx is customed for larger brushed whoop drones like Inductrix FPV Plus, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7. This fpv 1s battery is with the larger capacity of 30c, small size of 57 * 15 * 7.

BETAFPV 4 Sets 3-blade Props 31mm 0.8mm Shaft for 615 Motor Tiny Whoop Quad like Beta65 - 5 mm, light weight of 13g, you can get a long flight time and more power while staying at a suitable weight. Upgraded package of the 550mah battery with same reliable quality and adaption model, like Inductrix FPV Plus etc, No foam inserts are needed to carry the Tiny Whoop style batteries. As a fpv battery, don't over-charge, or over-discharge batteries.

More information about BETAFPV


Similar products



60pcs Screw Rubber Damper Set M1.2x4 Screw M1.4x5 Screw Rubber Damper for Tiny Whoop Blade Inductrix


BETAFPV - Only 04g and lighter enough. The 4 mounting columns could fit the whoop FC completely. These motors give this quad more power and more flight time than your regular 6mm Whoop. The frame is made of the same material as the stock Inductrix, but even lighter and more durable. Use this as a spare frame for your eachine E011 drone, or to DIY your own Tiny Whoop drone with 7x16mm motors.

This frame works with the inductrix fc, the inductrix FPV Pro FC, the Inductrix FPV FC, and all Betaflight Whoop style FCs. No need to modify the battery slot. No need to cut the column on the rear. 8 leds display channel and 6 LEDs display frequency group information. Smaller inertia and more power violent.

60pcs Screw Rubber Damper Set M1.2x4 Screw M1.4x5 Screw Rubber Damper for Tiny Whoop Blade Inductrix - M1. 4 * 5 screws fit for eachine black E010 frame or Beta75 frame. 16 pcs of betafpv 3-blade 40mm Props Tiny Whoop. 5. 8g fpv dipole whip high sensitivity antenna, no problem with range or durability. No need to add a foam adapter. No need to add a foam adapter.

More information about BETAFPV


Similar products



BETAFPV Backpack Carrying Case Blade Inductrix Storage Box with Foam Liner for Tiny Whoop Eachine E010 etc


BETAFPV - 8 leds display channel and 6 LEDs display frequency group information. These props is fit for Tiny Whoop airframe with 6x15mm motors. M1. 4 * 5 screws fit for eachine black E010 frame or Beta75 frame. Compact black case for the protection of your new drone. Random color:red, Pink, Yellow, Blue, White. Smaller inertia and more power violent.

Betafpv backpack carrying case blade inductrix storage box with Foam Liner for Tiny Whoop Eachine E010 etc This handbag carrying bag is specially designed for storing and carrying tiny whoop in outdoors. No need to add a foam adapter. Also you could use the dampers in hte frame. The last one is the defection of the battery.

The battery connector is micro jst 2. 0, not work with stock blade inductrix, Nano CPX, blade nano QX, Blade mCX etc. Betafpv 550mah 1s battery with the connector of jst-ph 2. 0 aka powerwhoop mcpx is customed for larger brushed whoop drones like Inductrix FPV Plus, BETAFPV Beta75 brushed drone, Beta75 Pro brushless drone or Kingkong Tiny 7.

BETAFPV Backpack Carrying Case Blade Inductrix Storage Box with Foam Liner for Tiny Whoop Eachine E010 etc - This fpv 1s battery is with the larger capacity of 30c, small size of 57 * 15 * 7. 5 mm, light weight of 13g, you can get a long flight time and more power while staying at a suitable weight. Upgraded package of the 550mah battery with same reliable quality and adaption model, like Inductrix FPV Plus etc, No foam inserts are needed to carry the Tiny Whoop style batteries.

More information about BETAFPV


Similar products

Paula’s Choice Gorgeous On The Go Makeup Collection

Smead Interior File Folder, 1/3-Cut Tab, Letter Size, Yellow, 100 per Box 10271